EGUARD INTRUDER ALARM EG 802-8 ZONE

Alarm Panel with 7 Wired Intrusion Zones and 1 Wired Fire Zone
One Dedicated 24 Hour Panic Zone.
Advanced Micro Controller Based System
Fixed Exit Delay of 45 sec for all 8 zones
0-240 Sec Entry Delay Time Setting
5 Admin Passwords
On Board Alpha Numeric Keypad With 4 line 64
character LCD display
2 Zones of 24 Hrs ,1 for Fire & 1 for Panic
System with Tamper Provision
Arm/Disarm through KeyPad /Key fob
All Zones are User Programmable
Time and Zone Status display on LCD
Can Connect up to 4 Sirens, Useful for local disconnect alert of the 1st Siren
User Programmable Siren Timing up to a maximum of 20 minutes
Built in Battery Backup Provision (Battery to be installed Mandatorily)
Low Battery cut off,over charge cut off,Deep Discharge protection
Battary voltage live indication

EGUARD INTRUDER ALARM EG 802 - Specifications

1. Power Supply : 180 to 275volts,1 Phase 50 Hz AC mains
2. Backup Power : 12VDC ,7Ah - SMFR Lead Acid Battery
3. Operating Current : 600 mA (Typ.) under Normal Conditions
4. Back Up Time : 9 Hrs. ( under fully charged Conditions )
5. Battery Charging Time : 14 Hrs.
6. No of sensor zones : 5 to 8
7. No of appliance control : 1 (Onboard)
8. Appliance rating : 500 watts per Port
9. Display : 16 X 4 dot matrix LCD display for menu : LCD Indication for 10 Zones Z1 to Z8 for alarm / Open/Close
10. Menu Keypad : 16 Alpha Numeric Keys for user setup • Zone Programming • Password creation • Voice recording • Text massage editing • Telephone number input • Date and time • Multifunction menu • Confirm entry • Cancel / Esc key • Number keys 0 to 9 • ACT Key (Recognized only with default Time/display screen) • Up, down, (alternate functions on number keys)
11. No of Hooter output : 2 on board optional expand up to 4
12. Alarm : External hooter

Download PDF